How To Stop a Toilet With a Manual Flushometer From Continuously Flushing
It is always a terrible thing when a business owner has to deal with a toilet overflow because the toilet will not stop flushing. This experience is inevitable, and it is a good idea to know some steps you can take to resolve the issue. The manual flushometer is what flushes a commercial toilet, and if it is not working properly, the water will continue running and a constant flush will take place. Here are some steps to try out to resolve this problem quickly.
Shut Off the Water
There are many reasons you need to stop a toilet from running as soon as possible:
- Running water can be costly.
- The issue could be a leak under the toilet.
- It can give a bad impression to your customers.
If you have a manual flushometer, check to see which way it is facing and look for the slot where you can easily use a screwdriver to turn it and shut the water off. You should then use a wrench to screw the lid off of the flushometer. After that, the flange cover should come right off. While it will not be as bad as a toilet flood, this step will likely leave a mess of water on the floor.
Clean Out the Gasket
Now that you removed the flange cover, you should see the gasket, which will typically be full of sediment. Look closely for the weep hole, which is the part of the toilet that’s causing the suction to release and is preventing it from being able to stop flushing, causing toilet overflow. Remove the gasket and clean it off and the weep hole carefully. Put everything back on the toilet, and this should prevent the constant flush.
If you follow these steps and it does not work, it’s very likely you will have to replace the gasket and find a professional to help with toilet overflow repair in Chino Valley, AZ. It can slow down business when you have a toilet that just will not stop running, so it is important to be aware of all of the simple steps you can take to find a solution quickly.